Creating Named MAC Extended ACLs

Step 1 配置終端進入全局配置模式

Step 2 mac access-list extended name Define an extended MAC access list using a name.

Step 3

{deny | permit}

{any | host source MACaddress | source MAC address mask}

{any |host destination MAC address | destination MAC address mask} [type mask | lsap lsap mask | aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm | etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump | msdos | mumps | netbios | vines-echo |vines-ip | xns-idp | 0-65535]

[cos cos]

Step 4 end Return to privileged EXEC mode.

Step 5 show access-lists [number | name] Show the access list configuration.

Step 6 copy running-config startup-config （Optional） Save your entries in the configuration file.

This example shows how to create and display an access list named mac1， denying only EtherType

DECnet Phase IV traffic， but permitting all other types of traffic.

Switch（config）# mac access-list extended mac1

Switch（config-ext-macl）# deny any any decnet-iv

Switch（config-ext-macl）# permit any any

Switch（config-ext-macl）# end

Switch # show access-lists

Extended MAC access list mac1

10 deny any any decnet-iv

20 permit any any

【相關文章】

• 專題：訪問控制列表(ACL)介紹

• 基于時間的訪問控制列表配置實例

• 訪問控制列表概述